N95 Face Mask Making Machine, Fully Automatic KN95 N95 Mask Machine N95 Mask Production Line Main Feature: 1. HESHUN MASK MAKING MACHINE IS used for full-automatic folding mask production (typical models like N95 mask). 2. The working process of HESHUN N95 Mask Machine is as follows: The...
N95 Face Mask Making Machine, Fully Automatic KN95 N95 Mask Machine
N95 Mask Production Line
Main Feature:
1. HESHUN MASK MAKING MACHINE IS used for full-automatic folding mask production (typical models like N95 mask).
2. The working process of HESHUN N95 Mask Machine is as follows: The multi-layer non-woven fabric rolls are subjected to compound roll welding after feeding. Nasal lines are welded after unrolling and cutting. Two rolls of rubber band are welded after automatically unrolling and cutting to designated length. Then masks are folded in half. After ultrasonic welding and fusion, the masks are rolling-cut and formed. Finally, we get finished N95 masks.
3. The masks produced by HESHUN MACHINERY have great filtration effect, perfectly fit face of people and are comfortable to wear without causing any pressure . The mask can be applied to various fields, like medical, electronics, mining, construction, etc. HESHUN N95 Mask Machine uses PLC, touch screen control and the main conveyor adopts unidirectional motor transmission, which can achieve precise movement, stable control and adjustable speed
Dinmension(LXWXH) | 10500MM×1500MM×2200MM |
Color | gray,will fllow this standard without special requirements |
Weight | 4800KG |
Ground load | Less than 500KG/ ㎡ |
Working power | 380VAC土5 % ,50HZ, rated power about 15KW |
Compressed air | 0.6 ~ 0.8 MPa, flow rate about 200L 1 min |
Operating environment
| temperature 10 ~ 35 C, humidity 5-35% HR, no flammable, corrosive gas, no dust (cleanliness no less than 10000) |
Advantage:
a.Fully automatic N95 production line
b.High stability, low failure rate, industrialized in appearance, sturdy without rust.
c.Computer PLC programming control, servo drive, high degree of automation.
d. Automatic tension control of raw materials to ensure the balance of raw material
5. Photoelectric detection of raw materials to avoid errors and reduce waste